To start on Fansly, make an account, verify your email and settle on your username. Next, apply at fansly.com/application, where an Ondato ID check comes before the application form. Once Fansly approves you, add tax forms, a payout method, your profile, tags, permissions and tiers, then publish your first post.
The order matters. Once you're a creator, only Fansly Support can change your username, and you can't withdraw until your tax forms are in. This guide follows Fansly's help centre and Creator Hub, as of October 2026. New to the platform? Start with what Fansly is and how it works.
What you need before you start on Fansly
Have these ready before you open the sign-up page:
- Age: you must be 18 or older and a legal adult where you live.
- An eligible location: "Residents of most countries are eligible to apply!" says Fansly's getting-started guide. Some places may be restricted due to international sanctions, and Fansly doesn't list them.
- ID and a camera: a passport, identity card or driver's license, plus a phone or digital camera rather than a computer camera, per Creator Hub.
- An authenticator app (recommended), such as Google Authenticator or Authy. Fansly also offers emailed codes.
Fansly's Creator Hub groups creator setup into five pages, from Submit Your Application to Making Your First Post. Add the help centre's account steps and the full order looks like this:
- Create your account and verify your email.
- Replace any temporary username, and turn on 2FA.
- Apply: Ondato first, then Fansly's application form.
- After approval, submit your tax documentation.
- Add a payout method.
- Set up your profile and tags.
- Set your permissions.
- Create your subscription tiers.
- Publish your first post.
How to make a Fansly account
Click Sign Up on the login page. With email, enter a username, email and password, confirm the password and click Join, per Fansly's account guide. You can also sign up with X (formerly Twitter), Google or Twitch.
Every new account gets a verification email with a link to click. If it doesn't arrive, check spam. Fansly's other listed causes are a wrong address, spam blocking, a deactivated account or a Twitch sign-up without an email. "Some regions require additional verification from a third party," it adds.
Choose your username before you apply
Fansly's name rules treat your two names very differently:
| Username | Display name | |
|---|---|---|
| Unique? | Yes | No |
| Where it's used | Your profile URL, and you can log in with it | Your profile; it defaults to your username |
| How to change it | Fans: Account Settings. Creators: contact Fansly Support | Account Settings, changes instantly |
The getting-started guide is direct: "If you have a temporary username (like user234234823482348), it's a good idea to update it before applying." Pick the name you want fans to type and share.
Turn on two-factor authentication on day one
Your account will hold your income, so secure it before you apply. In the agencies I've worked with, account security came first. Go to your profile picture > Settings > Account > "Setup 2 Factor Authentication", as Fansly's 2FA guide shows.
Scan the QR code with your authenticator app or enter it manually. Emailed codes are an option too. Fansly's warning comes in capitals: "DO NOT share your QR code."
How to become a Fansly creator
Apply at fansly.com/application by clicking "Apply Now". You need a verified Fansly account, so finish the email step first. The application has two parts:
- Ondato identity check: your ID plus a selfie taken in a well-lit spot.
- Fansly's application form: you're "automatically redirected" there after Ondato. It asks for your ID's front and back, a photo holding your ID with a handwritten sign, and a short video.
The sign shows your legal name, the date and "For Fansly". Our Fansly verification guide covers each item, plus co-performer rules. Fansly emails you with updates, questions and its decision.
How long does Fansly take to review an application?
Fansly gives two answers, and they don't match:
| Fansly source | Review time it states | When to follow up |
|---|---|---|
| Help centre article (updated 2025-09-17) | Usually within 24 to 48 hours after submission | After 72 hours, check junk or spam, then email support |
| Creator Hub (undated) | "We aim to review applications within 7-10 business days" | Email applications@fansly.com after 10 business days |
The main application article, updated 2026-08-05, only says "as quickly as possible". Plan your launch around the longer figure. Before you chase, the help centre suggests checking for missing or inaccurate details and adding Fansly to your safe senders.
What to do after Fansly approves you
Approval opens up your profile, payout methods and creator tools. Fansly's getting-started guide lists the next steps in this order, money first.
Submit your tax documentation
"You'll see a prompt on your homepage to complete tax documentation for your region," says the getting-started guide. Until you submit it, you can't withdraw.
US creators file a W-9 under Creator Dashboard > Tax Documentation. Non-US creators file a W-8BEN, with EU residents completing DAC7 first. Fansly doesn't withhold taxes, so set money aside. This is general information only, so check with an accountant.
Add a payout method
"To add a payout method, visit your Earnings Wallet, click Add Payout Method, and fill in the details," the guide says. Have your government ID and proof of address ready. Payouts only go to accounts in the name on your creator application.
Payouts are request-based. New earnings stay pending for 7 days, then you request a payout, and Fansly reviews most requests within 48 hours. Our Fansly payout schedule guide covers methods and minimums.
How to set up your Fansly profile
Click your profile picture > Profile, then the Profile button, per Fansly's profile guide. The getting-started guide lists your display name, icon, header, bio, link and location, and warns: "These details are public, even if you lock your feed."
Fansly recommends a high-quality picture, an attention-getting bio and links to your other platforms. Creator Hub's conversion tips add:
- Bio: "Mention your posting or live-streaming schedule if you're active frequently." Say whether you enjoy messaging too, because clear expectations encourage fans to subscribe.
- Header: "Think of your header as a billboard that pops up in the Suggestions tab."
- Pinned posts: "Try a friendly introduction post that outlines what new fans can expect." Keep to one or two pins and refresh them periodically.
- Wall albums: their titles show above the locked part of your feed, so name them clearly.
On sizes, Fansly's getting-started guide publishes one figure: "Ideal header size is 3261x1126." As of October 2026, there's no published avatar size or bio character limit.
Add profile tags and connect your socials
Next, "Click 'Tags' on the upper right to add keywords about your content." Profile tags are private, unlike public caption hashtags. Creator Hub sets no limit on them, as long as they're accurate and relevant.
Then sync Twitch and X under Settings > Connections. Fansly says this stays private. Followers there who connect or sign in with those accounts may get your profile recommended. Our Fansly hashtags guide goes deeper on tags.
How to set your Fansly timeline and media permissions
Set these before launch. Creator Hub says to "Ensure your timeline and media permissions are set correctly" first.
- Timeline permissions and blocked locations: Settings > Privacy & Safety, per Fansly's privacy settings guide.
- Media permissions: followers, subscribers or both, with "Advanced Permissions" to combine conditions.
- Follow settings: Creator Dashboard > Plans/Promos, where you can disable following or turn on "Require Payment Method to Follow".
If you disable following, remove "Following" from your timeline permissions too. Otherwise, Fansly warns, "New users won't be able to view your timeline content."
Hide your timeline without leaving the FYP
Hiding your timeline? Turn on "Internal discovery when the timeline is hidden" in Privacy & Safety. Fansly's FYP article says that toggle is what keeps you eligible for the For You Page.
Check your work with View Media As
Click the three dots on your profile or a post and choose "View Media As". Creator Hub says it previews how different users see your content. Check each audience you've set permissions for before you post.
How to set up subscription tiers
Go to Creator Dashboard > Plans/Promos > "Create Subscription Tier", as Fansly's audience guide shows. Prices run from $5 to $499.99 a month as of October 2026.
Creator Hub puts it simply: "Try to keep your subscription benefits simple and easy to read." You can cap subscribers on a tier, such as one with daily one-to-one messaging. For a temporary discount, use the "Promotion" button rather than changing your price. Our Fansly subscription tiers guide covers the rest.
How to make your first Fansly post
Creator Hub's first-post page walks through the composer: FYP posting, pins, wall albums, locked replies, scheduling, expiry, polls, tip goals, audio and "a free preview of your locked media". For reach, it says to "check 'Post to FYP' and use 5-10 hashtags."
Locked media needs a free preview to reach the FYP. Fansly's Creator Hub claims "Over 1 billion swipes on the FYP in 2025", so that checkbox is worth ticking.
Before you publish:
- Write your pinned introduction post.
- Sort media into albums by content type or permission.
- Turn on watermarking under Creator Dashboard > Uploads if you want it.
- Run View Media As one last time.
New creators can take up to 24 hours to appear in search, so don't worry if you can't find yourself straight away.
How to use Fansly as a fan
Fans don't apply. Sign up, verify your email and start following. Following is free, while subscribing is paid, usually monthly. You pay from a wallet or saved payment method, and everything is in US dollars.
Your profile picture opens Subscriptions, Collections and Settings, per Fansly's navigation guide. Search finds "hashtags, keywords, or creator names", and the home feed and FYP recommend content "based on your activity".
Fans in 12 US states and the UK, Australia, Brazil and Germany must verify their age through Ondato. Fansly's Account Basics collection covers the rest.
Starting creators on Fansly when you manage more than one
Every step above happens inside Fansly, for each creator, in their own name. Our Fansly API connects an account that already exists and is already approved. It doesn't replace applying or verification, and it can't create accounts, submit tax forms, add payout methods, or build tiers and profiles.
For team access inside Fansly, start with Management Sessions. Team members work on the account without the creator sharing their login. Permissions are set per link, and payouts and account closure always stay restricted.
To connect an approved account to the API, the creator consents and signs in with their own credentials. The connect flow uses four endpoints, plus one for reconnecting later:
- Start Authentication takes the username or email and password, and returns an
account_idandpolling_url. The docs say "Credentials are stored securely and encrypted at rest." - Poll Authentication Status shows whether a code is needed via
needs_code. Atwofa_typeof 0 means an authenticator app, and 2 means an emailed code after a new-IP login. - Submit 2FA sends that code. A wrong code keeps the challenge open, so ask the creator again.
- List Accounts confirms the result. Filter by
fansly_usernameand checkis_authenticatedandauthentication_progress. - Re-authenticate Account reconnects later with the stored credentials. Use it instead of a fresh Start Authentication.
The Fansly webhooks cover the same flow without polling:
fansly.accounts.connectedfires on a new connection and on a re-authentication.fansly.accounts.otp_code_requiredcovers both code types. The challenge is valid for 15 minutes after it's raised, so keep the creator on hand.fansly.accounts.authentication_failedleaves the account connected until you disconnect it.fansly.accounts.disconnectedretires the old ID for good, so the docs say to "key your own records onfansly_user.id".
Fansly events only show in the webhook picker after your team connects an account. The API documentation has the full reference, including Disconnect Account for when a creator leaves your roster.